Account Code Entry - Panasonic KX-TD308 User Manual

A

Account Code Entry

An Account Code is used to identify outside calls for accounting and billing purposes.
The account code is appended to the "Station Message Detail Recording (SMDR)" call
record. For incoming outside calls, account codes are not required. For outgoing outside
calls, account codes are often required. You can enter account codes in the following
three modes:
Verified - All Calls mode: You must always enter the specified account code.
Verified - Toll Restriction Override mode: You may enter the specified account code so
Option mode: You may enter any account code.
One mode is selected for each extension on a "Class of Service*
Soft Button Operation
Entering account codes before dialing
1
2
S 1
S 2
3
account code and #
4
CO
5
phone number
4-10
DPT Features
1. Lift the handset or press the SP-PHONE button.
2. Press the ACCNT (S3) button.
• You hear an intermittent tone.*
• The display shows:
ACCNT
S 3
3. Enter the account code and #.
• You hear a dial tone.
4. Press a CO button or enter the line access code (9 or 81
through 83).
5. Dial the phone number.
4.2
that you can override toll restriction.
Enter ACCNT Code
DPT Features
1 " basis.
2