Operation Of Various Features - NEC Express5800 series User Manual

Operation of Various Features

Check Consistency
Check Consistency is used to check consistency among virtual drives.
1.
Start WebBIOS on POST screen of CPU blade.
2.
Click [Virtual Drives] on WebBIOS Top Menu.
3.
Select a VD to perform Check Consistency from the upper right frame of Virtual Drives
screen.
4.
Click the checkmark column for Check Consistency from the lower right frame of Virtual
Drives screen.
5.
Make sure that Check Consistency is checked, and click [Go].
6.
Inconsistency may be detected at Check Consistency performed immediately after the VD
was configured. If the following alert is displayed, click [Yes] to perform Check
Consistency. A lot of inconsistency may be detected, however, it is not a failure.
Configuring Your Storage and I/O Blade
4-49