Toshiba gigabeat T Series User Manual page 18

Charging the built-in battery/Connecting your computer and the
1 Start your computer.
2 Connect your computer and the gigabeat
USB cable.
Connect to the USB port of your computer.
(Sample Illustration) Connecting the gigabeat
"Connected" will appear on the gigabeat
below.
(Sample Image) gigabeat
Getting Started with Your gigabeat®
Make sure your computer is connected to the AC adaptor.
Even if the gigabeat
up automatically and the built-in battery will start to
charge.
®
If the gigabeat
have Windows Media
"Found New Hardware Wizard" will start. If this wizard
starts, close it. Then install Windows Media
10 following the steps in
page 15.
The "Found New Hardware Wizard" may still appear if
Windows Media
because the necessary patch is not yet installed. Follow the
steps in "Installing the
patch.
®
power is not turned on, it will power
®
connection
is connected to a computer that does not
®
Player 11 or 10 installed, the
"Installing the
®
Player 10 is pre-installed. This is
software' on page 15 to install the
®
using the provided
®
to the computer
®
screen as shown
®
Player 11 or
software' on
17