Table of Contents
Advertisement
NOTE: Do not interrupt the upgrade process. You could damage your
Wireless Routing Center.
After the upgrade is complete, you can see the new firmware version in the Cur-
rent Firmware version field.
User Configurations
Save Current Configurations: Allows you to save your customized settings to the
Wireless Routing Center. Once your router is properly configured, you may wish to
save current settings. The saved settings can be retrieved easily if required, even
after you reload factory defaults.
Retrieve User Configurations: If you have loaded factory defaults (either via the
Load Default button on the back panel or via the Restore button in this group), you
can restore your last customized settings by clicking the Retrieve button.
Restore Factory Defaults: To restore factory defaults, click the Restore button
and then wait for a few minutes as the utility prompts. You will return to the System
configuration page when the process is complete. This feature lets you remotely
reset the Wireless Routing Center. Otherwise, the function is the same as resetting
via the Load Default button (see the Back section in Chapter 2, The Grant Tour).
System
Reboot: This option allows to you remotely reboot the Wireless Routing Center.
NOTE: Do not reboot the Wireless Routing Center during data transmis-
sion. Rebooting could interrupt data communication.
Figure 4-25 System Configuration
System Configuration
4-33
Advertisement
Table of Contents
