Table of Contents
Advertisement
DKT2404-UDR100 DECT Repeater
Maintenance
Maintenance
Safety Information
12 of 16
There are no user adjustments on the DKT2404-UDR100 Repeater.
Maintenance is only cleaning the case as needed.
CAUTION! Unplug the repeater from the AC power outlet before
cleaning.
•
Wipe the front of the repeater with a damp cloth or antistatic wipe.
•
Do not apply liquid cleaners directly on the repeater.
•
Never use aerosol cleaners or solvents.
•
To avoid static discharge, never use a plain dry cloth.
When using telephone equipment, basic safety precautions should
always be followed to reduce the risk of fire, electrical shock, and injury to
persons, including the following:
•
Read and understand all instructions.
•
Follow all warnings and instructions marked on the product.
•
Do not use this product near water; for example, near a sink or in a
wet area.
•
Do not place this product on an unstable cart, stand, or table. The unit
can fall, causing serious damage to the unit.
•
To protect the product from overheating, do not block or cover any
slots or openings in the base unit. This product should never be
placed near or over a radiator or heat register. This product should
not be placed in a built-in installation unless the proper ventilation is
provided.
•
This product should be operated only from the type of power source
indicated on the marking label.
•
Do not allow anything to rest on the power cord. Do not locate this
product where the cord will be damaged by people walking on it.
•
Do not overload wall outlets and extension cords, as this can result in
the risk of fire or electrical shock.
•
Never push objects of any kind into this product through the base unit
slots, as they may touch dangerous voltage points or short out parts
that could result in a risk of fire or electrical shock. Never spill liquid of
any kind on the product.
•
To reduce the risk of electric shock, do not disassemble this product.
Contact qualified service personnel when some service or repair work
is required. Opening or removing covers may expose you to
dangerous voltages or other risks. Incorrect reassembly can cause
electric shock when the appliance is subsequently used.
Unplug this product from the wall outlet and refer servicing to qualified
service personnel under the following conditions:
•
When the power supply cord is damaged or frayed.
•
If liquid has been spilled onto the product.
TOSHIBA
DKT2404-UDR100 Repeater 04/09
Advertisement
Table of Contents
