Toshiba Strata CIX Installation And Maintenance Manual page 27

Step 8. Check Hardware Connections

Check to insure that all other boards and cables are properly seated.
Step 9. Complete MicroMAS Hardware Setup
1. Replace the cover and tighten the two thumbscrews.
2. Connect the following items (see
connections):
• Keyboard
• Monitor
• Mouse
The hardware portion of this installation is now complete.
Step 10. (Optional) Install Footstand

Set the unit on the footstand (shown at right).
AC Power Cord
Connectore
Main Power
Switch
Figure 1 - 11 MicroMAS Front and Back Panels
Strata CIX MAS Installation 06/09
Figure 1 - 11 on page 17
USB
RJ45 LAN
Connection
220V and 110V Switch
Media Application Server Installation
for
PCI Card Slots
Com 1
Line-out (Green)
Com 2
Line-in (Blue)
Keyboard
VGA Connector
Mouse
MicroMAS Installation
Front Panel
003-MM
Mic-in (Pink)
Rear Panel
1-17