Toshiba Strata CIX Programming Manual page 25

Table 1-5 Programs 103~107 (continued)
Button Sequence
105-26 Call Button Jumping
FB26 Hold Hold
, n, ,
106 Day/Night Mode Day
of Week Mapping
106 Hold
,
106-00 Tenant Number
106-01 Monday
106-02 Tuesday
106-03 Wednesday
106-04 Thursday
106-05 Friday
106-06 Saturday
106-07 Sunday
107 PAD Table
Assignment
107 Hold
,
107-01 Sender PAD Device
Number
FB01 Hold
, n,
See ìPAD Tableî on
page 1-22.
107-02 Receiver PAD Device
Number
FB02 Hold
, n1,
107-03 PAD Loss
FB03 Hold Hold
, n2, ,
Strata CIX/CTX Telephone Button Programming 11/04
Value(s)
n = 1. Enable (default)
2. Disable
n = Enter 1~8
n = 1. Work Day (default)
2. Non-Work
3. Holiday
n = 1. Work Day (default)
2. Non-Work
3. Holiday
n = 1. Work Day (default)
2. Non-Work
3. Holiday
n = 1. Work Day (default)
2. Non-Work
3. Holiday
n = 1. Work Day (default)
2. Non-Work
3. Holiday
n = 1. Work Day
2. Non-Work (default)
3. Holiday
n = 1. Work Day
2. Non-Work (default)
3. Holiday
n = Up to 3 digits
1-10 (PAD device number)
or PAD Group Number:
101~106 (CTX100)
101~110 (CTX670 Basic)
101~132 (CTX670 Exp.)
n1 = Up to 3 digits
1-10 (PAD device number)
or PAD Group Number:
101~106 (CTX100)
101~110 (CTX670 Basic)
101~132 (CTX670 Exp.)
n2 = 1. 6 dB Net Gain
2. 3 dB Net Gain
3. 0 dB
4. 3 dB Net Loss
5. 6 dB Net Loss
6. 9 dB Net Loss
7. 12 dB Net Loss
8. 15 dB Net Loss
Telephone Button Programming
Summary
If enabled, line calls move from a telephone DN button to a line button
after they are answered. After the call is answered, the DN button is
cleared to receive another call. With this operation the DN acts as an
answer button for the phone. This only applies if the line answered
has a CO, GCO, or Pooled line button appearance on the phone. If
disabled, line calls remain on the DN after they are answered.
The Day of the Week schedule defines each day as the type of day
the schedule shall follow. These types of days are called Work Day,
Non-work Day, and Holiday. Each day of the week can be classified.
Select the Tenant number for which the daily schedules will be
configured.
Enter the type of day to follow for daily schedule. 1- Work Day;
2- Non-Work Day; or 3- Holiday.
Enter the type of day to follow for daily schedule. 1- Work Day;
2- Non-Work Day; or 3- Holiday.
Enter the type of day to follow for daily schedule. 1- Work Day;
2- Non-Work Day; or 3- Holiday.
Enter the type of day to follow for daily schedule. 1- Work Day;
2- Non-Work Day; or 3- Holiday.
Enter the type of day to follow for daily schedule. 1- Work Day;
2- Non-Work Day; or 3- Holiday.
Enter the type of day to follow for daily schedule. 1- Work Day;
2- Non-Work Day; or 3- Holiday.
Enter the type of day to follow for daily schedule. 1- Work Day;
2- Non-Work Day; or 3- Holiday.
Assigns additional Sender and Receiver PAD values to pad groups in
the pad table.
Enter Sender PAD Device or Group Number from PAD Table
(following this section).
Enter Receiver PAD Device Number or Group Number from PAD
Table (following this section).
Enter PAD Value (See PAD Table below). The value shown shows the
net effect.
Note To PAD is to insert loss; therefore, negative loss equals net
gain.
100 Series Programs
1-21