Bios Settings; Determining The Bios Version; Enabling Imapi For Writing To Cds - NEC Express5800/320Ma Administrator's Manual

BIOS Settings

To check the status of a service
1. Click Start, point to Programs, point to Administrative Tools, and then click
Computer Management.
2. Double-click Services and Applications, and then click Services.
3. In the right-hand pane, in the Status column, the Stratus services should all be
listed as Started. In the Startup Type column, they should all be listed as
Automatic.
If a service's status is Stopped or blank, attempt to start the service by right-clicking it,
and then clicking Start. If the service fails to start, check the event log for any
messages related to the service.

BIOS Settings

To manage BIOS settings, your Express5800/320Ma system uses the ftServer Setup
utility.
To start the BIOS setup utilities
1. Turn on or reboot your system. When the logo screen appears, press F2 to enter
the BIOS setup utility.
2. After executing some power-on self-test (POST) procedures, the system displays
the setup utility's Main menu.
See the Express5800/320Ma: Technical Reference Guide for cautions and details
about using the BIOS Setup utilities.

Determining the BIOS Version

Use ftSMC to determine the BIOS version. Click a CPU Enclosure node and look at
the value of the BIOS: Stratus Version property in the details pane.

Enabling IMAPI for Writing to CDs

Your Express5800/320Ma system supports optional DVD±RW drives. Before writing to
the DVD±RW drive, enable the Image Mastering Applications Programming Interface
(IMAPI), which is turned off by default.
2-10 Express5800/320Ma: System Administrator's Guide
N O T E
The Sysmgt Startup service runs only when the system
first starts. This service starts the other system services.
After the other services have started, it stops running and
its status is blank.