Miele H 136 MB Operating Instructions Manual page 58

Electrical connection AUS, NZ
All electrical work should be carried out
by a competent person, in accordance
with national and local safety regulations.
Depending on the version, the ap-
pliance is supplied with a mains cable,
or a mains cable and plug for connec-
tion to a.c. 50 Hz, 230 - 240 V.
The voltage, rated load and fuse rating
are given on the
the front of the oven interior. Please en-
sure that these match the household
mains supply.
For extra safety it is advisable to install
a residual current device (RCD) with a
trip current of 30 mA.
Connection for the appliance
should be made via a suitable isolator
which complies with national and local
regulations, and which is accessible
after the appliance has been built in.
Test marks
Electrical safety, C-Tick Mark
Electrically suppressed according to
AS/NZS 1044
58
situated at
As the colours of the wires in the mains
lead of this appliance may not corre-
spond with the coloured markings ident-
ifying the terminals in your plug, pro-
ceed as follows:
The wire which is coloured green and
yellow must be connected to the termi-
nal in the plug which is marked with the
letter E or by the earth symbol z or col-
oured green or green and yellow.
The wire which is coloured blue must
be connected to the terminal which is
marked with the letter N or coloured
black.
The wire which is coloured brown must
be connected to the terminal which is
marked with the letter A or coloured red.
The wires in the mains lead are col-
oured in accordance with the follow-
ing code:
Green / yellow = earth
Blue = neutral
Brown = live