Table of Contents
Advertisement
The stainless steel surface has a
protective foil to prevent scratching
during transportation.
^ Do not remove this foil until the
appliance has been installed or built
in. Start at one of the upper corners.
^ Clean the inside of the appliance and
the accessories with warm water and
a little washing up liquid, and then
dry with a soft cloth.
Important:
To ensure correct functioning of the
appliance, let it stand for between ½
and 1 hour after transporting it to its
final location before connecting it to
the mains.
The wine cellar and freezer section are
switched on independently of one
another so that, if required, you can
switch on only one.
^ Press the On/Off button for the wine
cellar.
A bar will flash in the temperature
display for the wine cellar and the wine
cellar will start cooling.
The alarm will sound when the
appliance is first switched on as well as
to warn if the temperature gets too
"warm".
^ Press the On/Off button for the
freezer section.
Bars will flash in the temperature
display for the freezer section and the
freezer section will start cooling.
The alarm will sound when the
appliance is first switched on as well as
to warn if the temperature gets too
"warm".
Allow the appliance to run for a few
hours before placing food in it. This will
ensure that the temperature is
sufficiently low.
^ Press the appropriate alarm button.
The alarm stops. The bars will continue
flashing in the relevant temperature
display until the temperature range set
has been reached.
Place the cool pack in the top freezer
drawer or to save space on the freezer
tray. The cool pack will be at its most
effective after it has been in the freezer
for approx. 24 hours.
11
Advertisement
Table of Contents
