Table of Contents
Related Manuals for Miele KM 5722
Summary of Contents for Miele KM 5722
- Page 1 Operating and installation instructions Ceramic hob with induction KM 5722 To avoid the risk of accidents or damage to the appliance, it is essential to read these instructions before it is installed and used for the first time. M.-Nr. 06 998 390...
-
Page 2: Table Of Contents
Contents Guide to the appliance ..........4 Hob . - Page 3 Contents Installation ............33 Safety instructions for installation .
-
Page 4: Guide To The Appliance
Guide to the appliance abcd Cooking zones Control panel Control panel Sensor switches for: f Booster g Power level and safety lock h Hob ON/OFF i Cooking zones ON/OFF... -
Page 5: Cooking Zone Display
Guide to the appliance Cooking zone display j Displays: = Cooking zone ready for use 1 to 9 = Power levels = Residual heat ß = No pan on cooking zone or pan unsuitable (see "Induction") = Booster P0 etc. = Programme (see "Programming") S0 etc. -
Page 6: Warning And Safety Instructions
Warning and Safety instructions Technical safety To avoid the risk of accidents and The appliance must be installed damage to the appliance, please and connected by a suitably read these instructions carefully qualified and competent person in strict before using it for the first time. They accordance with current local and contain important notes on its national safety regulations. - Page 7 Warning and Safety instructions Correct usage Never open the casing of the appliance. For safety reasons this appliance Tampering with electrical connections must only be operated after it has or components is highly dangerous to been built in. This is necessary to the user and can cause operational ensure that all electrical components faults.
- Page 8 Warning and Safety instructions Safety with children Keep all pans out of reach of children. Turn pan handles inwards Use the safety lock to prevent away from the edge of the hob. Danger children operating the appliance or of burning or scalding. Special hob altering the settings.
- Page 9 Warning and Safety instructions Protecting the appliance from Never place hot pans near the control area. This could damage damage the electronic unit underneath. Do not drop anything on the This hob is fitted with a cooling fan. ceramic surface. Even a light If a drawer is fitted directly object could cause damage in certain underneath the hob, ensure that there...
- Page 10 Warning and Safety instructions Protection from burning and Do not cover the appliance, e.g. with a cloth, kitchen foil, etc. This scalding could be a fire hazard if the appliance The appliance gets hot when in is switched on by mistake. use and remains hot for quite a Never leave the appliance while after being switched off.
- Page 11 While the appliance is under socket and withdraw the plug. Contact guarantee, repairs should only be the Miele Service Department. undertaken by a service engineer Do not reconnect the appliance to the authorised by the manufacturer.
- Page 12 Warning and Safety instructions Futher safety notes Do not use plastic or aluminium foil containers. These melt at high For people fitted with a heart temperatures and could damage the pacemaker: ceramic surface. Fire hazard. Please note that the area immediately surrounding the hob is To prevent damage to items which electromagnetically charged, and that...
-
Page 13: Caring For The Environment
Caring for the environment Disposal of the packing Disposal of your old appliance material Electrical and electronic appliances often contain materials which, if The transport and protective packing handled or disposed of incorrectly, has been selected from materials which could be potentially hazardous to are environmentally friendly for disposal human health and to the environment. -
Page 14: Before Using For The First Time
Before using for the first time Cleaning and heating up for Metal components have a protective coating which may give off a slight the first time smell when heated up for the first time. Before using for the first time, clean the The smell and any vapours will appliance with a damp cloth only and dissipate after a short time, and do not... -
Page 15: Induction
Induction How it works If a suitable pan is placed on the cooking zone within 3 minutes, the ß An induction coil is located under each will go out and you can continue as cooking zone. When a cooking zone is normal. -
Page 16: Noises
Induction Noises The appliance has a cooling fan to help extend the life of the electronics. When When using an induction cooking zone, the hob is being used intensively, this the following noises can occur in the will come on and you will hear a pan, depending on what it is made of whirring sound. -
Page 17: Pans
Induction Pans Pan size Suitable pans include: To make optimum use of the cooking zones, choose pans with diameters – stainless steel pans with a magnetic larger than the innermost markings but base smaller than the outermost markings. If – enamelled steel pans the diameter of the pan is smaller than the innermost marking, the induction –... -
Page 18: Operation
Operation Sensor switches Take care to keep the control area This hob is equipped with electronic clean. Do not place anything on the sensor switches which react to finger control area. The sensor switches contact. may fail to react or they could To operate a cooking zone, touch the mistake the article or any dirt for a relevant sensor switch. -
Page 19: Switching On
Operation Switching on The power setting selected flashes in the display for a few seconds to start The hob must be switched on before with and then lights up constantly. any of the zones can be used. To change a power setting which has To switch the hob on: already been set, touch the sensor for the relevant zone once briefly. -
Page 20: Settings
Operation Settings Cooking process Settings* Melting butter 1 - 2 Dissolving gelatine Warming small quantities of food/liquid Keeping warm food which sticks easily Cooking rice Defrosting frozen vegetables Warming liquid and semi-solid foods Thickening sauces, e.g. Hollandaise Making porridge Preparing omelettes, lightly fried eggs Steaming fruit Defrosting deep frozen food Steaming vegetables, fish... -
Page 21: Auto Heat-Up
Operation Auto heat-up How to activate Auto heat-up ^ While a 0 is flashing in the cooking When Auto heat-up has been activated, the cooking zone switches on zone display, touch the - sensor until automatically at the highest setting and the required continued cooking setting appears, e.g. -
Page 22: Booster Function
Operation Booster function To switch the booster on: ^ Touch the sensor for the relevant All of the cooking zones are equipped with a booster function, i. e. an increase cooking zone. in the power level. ^ Press the B sensor. If activated, the zones will operate on A P will start to flash in the display for power setting 9 with an extra boost of... -
Page 23: Switching Off And Residual Heat Indicators
Operation Switching off and residual heat The lines of the residual heat indicator go out one after another as the cooking indicators zones cool down. The last horizontal line only goes out when the cooking To switch off a cooking zone: zone is safe to touch. -
Page 24: Safety Features
Safety features Safety lock To activate the safety lock, touch the - and + sensors at the same time until Keep children away from the hob for you hear the audible tone. their own safety. When touching a sensor for a zone Your appliance is equipped with a when the safety lock is activated, the safety lock to prevent the hob and the... -
Page 25: Safety Switch-Off
Safety features Safety switch-off Safety switch-off if the sensors are covered Safety switch-off with an over-long Your hob will switch itself off cooking time automatically if one or several of the sensor controls remain covered for Your hob is fitted with a safety switch-off feature in case you forget to switch it off more than about 10 seconds, for yourself. -
Page 26: Overheating Protection
Safety features Overheating protection Overheating can be caused by: All of the induction coils and the cooling – heating up an empty pan element for the electronics are fitted – fats or oils being heated up on the with an overheating protection highest power setting. -
Page 27: Cleaning And Care
You (available from the Miele Spare Parts should also avoid using sponges Department). Follow the manufacturer's etc. which have previously been instructions on the packaging. - Page 28 Cleaning and care Should any sugar, plastic or Appliances with aluminium frames aluminium foil spill or fall on to a hot (see data plate) are prone to cooking zone while it is in use, first scratching, alkali and acid damage. switch off the appliance.
-
Page 29: Programming
Programming You can change the standard settings To set the status: of your hob. ^ Touch the front right cooking zone ^ With the hob switched off, touch the sensor. hob ON/OFF sensor s and the The relevant number will begin to flash. booster sensor B at the same time, ^ Touch the + or - sensors to set the until P (Programme), S (Status) and... -
Page 30: Problem Solving Guide
– switch off at the mains, or – withdraw the mains fuse. Reset the trip switch in the mains fuse box, and switch the appliance back on. If it still will not switch on, contact a qualified electrician or the Miele Service Department. - Page 31 Problem solving guide ... one of the following has occurred: ... The cooling fan continues to run after the appliance has been – The booster has automatically switched off switched off early. This is not a fault. The fan will continue –...
-
Page 32: After Sales Service, Data Plate
– Your Miele dealer, or – the Miele Service Department (see back cover for address). When contacting the Service Department, please quote the model and serial number of your appliance, which are given on the data plate. -
Page 33: Installation
Installation Safety instructions for After installing the hob, ensure that the connection cable cannot come installation into contact with the underside of the appliance. Make sure that there is no Fit wall units and extractor hood mechanical obstruction, such as a before fitting the hob to avoid drawer, which could damage it. - Page 34 Installation Safety distance above the hob When two or more appliances are installed together below a cooker hood, e.g. an electric hob and a gas wok combiset, which have different safety distances given in the installation instructions, you should select the greater distance of the two.
- Page 35 Installation Safety distances to the sides of the Ideally the hob should be installed with plenty of space on either side. There may be a wall at the rear and a tall unit or wall at one side. On the other side, however, no unit or divider should stand higher than the hob (see illustrations).
- Page 36 Installation Safety distance when installing the appliance near a wall with additional niche cladding There must be a minimum distance of 50 mm between the niche cladding and the worktop cut-out. This distance is only necessary for niche cladding made of wood or any other combustible material.
-
Page 37: Installation Above An Oven
Induction hob fan a back panel. d Distance between the front edge of When installed above a Miele oven the fan and the worktop cut-out in a worktop thickness 0 40 mm the (depending on the type of hob) - Page 38 Installation Building-in dimensions a Front b Building-in depth c Mains connection cable, L = 1,440 mm...
-
Page 39: Preparing The Worktop
Installation Preparing the worktop Installing the hob ^ Make the worktop cut-out following ^ Feed the hob connection cable down the dimensions applicable. through the cut-out. Remember to maintain a minimum ^ Place the hob centrally in the cut-out. safety distance of 50 mm from the When doing this make sure that the back wall, as well as from any tall unit seal under the hob sits flush with the... -
Page 40: Sealant
Installation Sealant Do not use any sealant unless expressly instructed to do so. The sealing strip under the edge of the top part of the hob provides a sufficient seal for the worktop. Do not use sealant between the frame of the top part of the hob and the worktop. -
Page 41: Electrical Connection
Installation Electrical connection Connection should be made via a suitable isolator which complies with All electrical work should be carried national and local safety regulations, out by a suitably qualified and and the On/Off switch should be easily competent person, in strict accessible after the appliance has accordance with current local and been built in. - Page 42 Installation WARNING THIS APPLIANCE MUST BE EARTHED The electrical safety of this appliance can only be guaranteed when continuity is complete between it and an effective earthing system, which complies with current local and national safety regulations. It is most important that this basic safety requirement is present and regularly tested and where there is any doubt, the electrical wiring...
-
Page 43: Wiring Diagram
Installation Wiring diagram N.B. This appliance is supplied single phase only in the U.K. / AUS / NZ... - Page 44 Alteration rights reserved / 4806 M.-Nr. 06 998 390 / 01 en - GB...