About Dme Designer - Yamaha DME4io-C Owner's Manual

Introduction to the DME Satellite

About DME Designer

DME Designer software enables you to integrate, configure, and control the DME series system from a connected
computer.
You can build the DME series audio system using graphic blocks in DME Designer that are displayed on the com-
puter monitor.
The DME series settings, configuration, and parameter data are transferred from the computer to the DME series
unit via the USB or Ethernet connection.
Once the data is transferred to the unit, you can disconnect the DME series unit from the computer and use it as
a stand-alone processor.
Alternatively, you can control the DME series unit real-time from DME Designer as long as it is connected to a
computer.
If multiple DME series units are connected in the network, DME Designer enables you to build a configuration
that includes those units.
Refer to the "Connecting to a Computer" (page 22) for more information on connecting a computer to the DME
Satellite. Refer to the DME Designer Installation Guide for detailed information on installing the DME Designer
application and required software drivers.
Refer to the DME Designer Owner's Manual for setup and operation instructions.
14
DME8i-C/DME8o-C/DME4io-C Owner's Manual