Cobranet Connection (Cobranet Connectors); Controlling Dme Satellite's Internal Head Amps From A Digital Mixer Yamaha Ls9 - Yamaha DME8i-C Owner's Manual

Connecting to an External Device

CobraNet Connection (CobraNet Connectors)

You can use the CobraNet connector to control the DME Satellite's internal head amp or other functionality.

Controlling DME Satellite's internal head amps from a digital mixer Yamaha LS9

The internal head amp settings of a DME8i-C or DME4io-C can be remotely controlled from a digital mixer LS9.
Use the MY16-CII interface card to make CobraNet connections between the digital mixer and the DME series.
Use an Ethernet cable connected to the [NETWORK] connectors to make connections between DME series
units.
The gain and the phantom power (+48V) can be controlled from the digital mixer.
32
DME8i-C/DME8o-C/DME4io-C Owner's Manual
MY16-CII
LS9
NOT E
• Only one mixer can be connected within each device group.
• The digital mixer can be connected to any DME series unit, whether it is the group master or a slave unit.
• The ID number of the DME series unit being remotely controlled is specified from DME Designer.
For details on making this setting, refer to the "DME Designer Owner's Manual."
• If the connection between DME series units is broken, it will no longer be possible to communicate with DME units of an
ID number that follows the disconnected DME.
Switching
Hub
Switching
Hub
DME8i-C
INPUT
PEAK PEAK PEAK
SIGNAL SIGNAL SIGNAL DIGITAL MIXING ENGINE SATELLITE
USB
PEAK PEAK PEAK
SIGNAL SIGNAL SIGNAL
INPUT
DME8i-C
Ethernet
CobraNet
Ethernet Switching Hub
CobraNet Switching Hub