Mitsubishi Electric CP3800DW User Manual page 13

5. Install the new roll of paper on the paper holder.
When installing it, make sure there are no gaps between the paper and the holder.
Make sure the paper is not sticking out. If the end of the roll is uneven (with paper sticking out), remove it from
the holder, and flatten it.
6. Set the paper holder into the paper cassette. (Set it firmly all the way in)
Set the paper in the direction indicated below.
Paper direction
○
×
Check for uneven ends
×
Seal
12
Se Sett t i t n ing g Up Up th the e Pr Prin inte ter r
Setting Up the Printer Setting Up the Printer
No gaps
Check for uneven ends