Table of Contents
Advertisement
5.3
Accessing the recorder from the pop-up window
When the PC receives IP alarm notification from the recorder, the following pop-up window appears.
Pop-up windows to be displayed vary depending on the type of recorder used. When the PC receives notifications
from the same recorder successively, those notifications are listed on the same pop-up window.
Name and IP address of the
registered recorder
For notifications issued from not-
yet-registered recorder, only the IP
address of the recorder is
When you click the [Connect] button on the pop-up window, this software accesses the recorder that issued the
notification and starts loading live images from it. Select any of the following methods to access the recorder
according to the status of this software.
[When you have not started this software by the network function]
The application login screen of this software is displayed. Enter your user ID and password, and then click
[Network] to log in.
[When you have started this software by the network function]
• When the recorder issuing the notification has not been registered yet:
A message asking you whether to register the recorder or not is displayed. Click [Yes] to register the recorder.
At the completion of registration, the recorder login dialog box appears. Log in to the recorder under the user ID
registered in the recorder. All the cameras registered in the recorder are displayed and this software starts
loading their live images.
• When the recorder issuing the notification has already been registered:
The recorder login dialog box appears. Log in to the recorder under the user ID registered in the recorder. All
the cameras registered in the recorder are displayed and this software starts loading their live images.
[When the recorder has already been connected and communicated]
All the camera windows of the recorder show live images. The camera windows showing recorded images and
those in a stop state start displaying live images.
6 Playing back copied data of the recorder
6.1
Playing back data copied in the file system format (FSM format)
Click [Folder] on the application login screen of this software (
3.10 on page 13). FSMPlayer is able to play back the copied data supporting the following formats. You can open
the FSMPlayer panel in 4 stages by clicking
search and bookmark operations. In the second stage, you can select a camera to display. In the third stage, you
can adjust playback speed (reducing only) and in the fourth stage, you can make various settings for audio play-
back.
FSM1 ....................... DX-TL800E and DX-TL900U
FSM2 ....................... DX-TL2500 series, DX-TL950E, and DX-TL910U
FSM3 ....................... DX-TL5000 series
displayed.
see 3.1 on page 7) to start FSMPlayer (
on the right side. In the first stage, you can select playback ,
– 41 –
[Connect] button
Click to close this window.
[Folder] button
see
Advertisement
Table of Contents
