11. Web UI (RoomView Connected projectors only)
Web UI is a tool to control and monitor the projector using a Web browser.
For some projectors, you have to change a setting in projector menu to enable this function.
11.1. Main functions
• Projector control (You can control the projector using the computer screen.)
• Projector status display (projector name, lamp mode, lamp operation time, error/warning, etc.)
11.2. Starting Web UI
(1) Enter the projector's IP address (e.g. http://192.168.0.30) in the address bar of the browser
and then press the Enter key.
<Note>
• You can connect only one Web UI to one projector.
Control screen
You can perform the following controls by clicking the buttons and tabs displayed on the screen.
Power:
AV Mute:
Vol +/-:
Source List:
Turns on or off the power.
Mutes the video and audio temporarily. Clicking this button again will disable the
mute.
Adjusts the audio volume.
The source you click is displayed. To see hidden sources, click or to scroll the
list.
EN-26