Gigaset 3070/3075isdn, GB, A31008-G3070-B100-3-7619
Operation with other devices
Step
by
Step
For information on operation and call number assignment, please refer to "Reg-
istering other devices" on page 7.
Registering a Gigaset 3000 Classic handset
base station
Registering the Gigaset 2000S handset
Handset
<press green illuminated key on base station>
by the base station
Normal telephone (POT)
This connection must be enabled before a normal telephone (POT) can be put
into service, see "Setting the device type" on page 20.
Registering third-party GAP handsets
Press the green illuminated key on the base station.
1.
Prepare the GAP handset for registration (see the handset operating instruc-
2.
tions). A connection is setup between the base station and the GAP handset.
The GAP handset is assigned the lowest available internal number. An available
internal number cannot be selected via the GAP handset.
The display depends on the GAP handset used, as the base station does not
Info
send display information to GAP handsets.
Activating and deactivating the repeater capability
The Gigaset repeater allows you to double the range of your handset and can
be used as an accessory for Gigaset 3070/3075isdn. This function allows you
to activate and deactivate the repeater capability.
Further information can be found in the operating instructions for the Gigaset
repeater.
Press
1.
Select using [ ] and [OK]:
2.
Spec. function
3.
Set using [OK]:
4.
back, press [BACK]
<Base No.> [OK]<System Code>[OK] <
>, <INT No.>
(off), press <Base No> and
0
)
for selection menus.
Service Set up
Repeater
.
[NEXT]. The handset is then temporarily disabled. To switch
giga3070KAP .fm
Operation with other devices
press green illuminated key on
0
System Code
(on) simultaneously,
(
internal number is assigned automatically
Settings
System settings
= ON / no
= OFF
09.01.01
57