Haier HWD–C1200TXVE-U User Manual page 18

18
CLEAnIng&CARE
WAtER iNLEt AND iNLEt FiLtER
To prevent blockage to the water supply by ingress of foreign
substances, clean the water inlet and inlet filter regularly .
MOviNg thE MAchiNE
If the machine is to be moved to a distant location, replace
the transportation locks removed before installation to prevent
damage as shown below .
1 . Remove the blanking plugs .
2 . Remove the back cover
3 . Insert the synthetic stabilisers and the transportation bolts .
4 . Tighten the bolts with a spanner .
5 . Replace the back cover .
LONg pERiODS OF DiSUSE
If the washer dryer is left idle for a long period, pull out the
electrical plug and turn off the water supply . Open the washer
dryer door to prevent formation of moisture and odours . Let
the door open while not used .
MAiNtENANcE
1.
3.
2.
4.
5.
Powe r Start/Sto p
W Temp Te mp Te mp W ash
Wash Rinse Spin Dry Wash
Speed Speed Quickwash Quickwash Quickwash Rinse Rinse
Speed
W ool Wool W ool Spin Spin Spin
Delay E xtra Dry E coTime Start/ Synthetics Synthetics Dry Dry Dry
Delay Extra rinse rins e Dry ECO Start/Pause Paus e Synthetics
Cotton&Linen Cotton&Line Ir o n Ir o n
Cotton&Linen Iron
Prewash Prewash Prewash Air wash Air wash Air wash