Changing Channels; Adjusting The Color Convergence - Toshiba 57H82 Owner's Manual

Changing channels
"lbchange to a specific channel (programmed or unpmgrammed):
Press the Chmmel Number buttons (0-9 and 100).
For chmmels 100 and higher, press the 100 button, and then the
next two numbers. For example, m select channel 125, press 100,
2,5.
"lb change to the next programmed channel:
Press Channel A or • on the "I_V or remote control.
Changing channels using SpeedSurf
To use SpeedSurf to change to a specific programmed channel:
1. Press and hold Channel A or • for about one second. The "YV
will enter the SpeedSurf mode.
Upper channels
f
-- Current channel (highlighted)
Lower channels
Channel label (if set)
2. Repeatedly press or hold Channel i or • while the SpeedSurf
mode is on-screen to scroll the channel list. Release the button to
display the highlighted channel.
Adjusting the color convergence
This projection "I_Vuses three separate "I_Vtubes: red, green, and blue.
The red, green, and blue images are projected onto the screen where
they converge to form a full-color picture. _2)u can see a dear picture
only when the three images converge correctly. Convergence may drift
over time or if you move the "I_V.If you can see clear im_es on your
"I_Vscreen, skip this procedure.
It is recommended that the adjustment is made only after the "I_Vhas
been on _)r at least 30 minutes.
Automatically adjusting the color convergence using
TouchFocus
TM
Press TOucHFocus on the "I_Vonce. The "I_Vwill enter
aura-convergence mode and
adjust
the convergence
automatically.
TOUCH FOCUS TOUCH FOCUS FI tq { SHED
+When the adjustment is complete, the normal picture appears.
If the error message "'lbuchFocus Error" appears, retry the
TouchFocus adjustment, or adjust the convergence manually, as
described on the next page.
Number
MENU
TV front panel
MENU ,kS'< !_ TouchFocus
TM
,&v