Preparingto Install The Refrigerator; Water Supply To The Icemaker - GE Profile 24 CustomStyle Owner's Manual

Preparingto install the refrigerator.
Read these instructions completely and carefully.
Water Supply to the Icemaker
You _dll need to (onne(t tile i(emaker to a (oM
water line.
A water supply kit (containing copper robing,
shutoffvalve, fittings and insu_uctions) is available
at exua cost flom }x_urdealer or fiom Parts and
Accessories, 800-626-2002.
RefrigeratorLocation
Install it on a floor strong enough to support it
fiflly loaded.
Clearances
Allow tile fi)lloxdng clearan( es for ease of
installation, proper air (ir(ulation and plulnbing
and electrical connections.
24" Model 28" Model 30" Model
Sides
1/8" (3 IIllIl) 1/8" (3 IIllIl) 1/8" (3 IIllIl)
Top
1" (2,_ 111111)
1/8"
(3111111)
1/8"
(3111111)
Back ]/2"(13ram) ]/2"(13ram) ]/2"(13ram)
If built-in, aflow 7/8" {22 ram)for hinge covers.
If tile retiigerator is against a wall
on either side, all{)w 3/4" (19 ram)
on each side fi)r a 90 ° door opening.
Leveling Rollers
Theroflershave2 purposes:
[_The
rollers (an be adiusted so tile refiigerator
is
firmly positioned on tile floor and does not rock
ba(k and forfll.
[_ Rollers allow you to move tile retiigerator away
fiom tile wal(fi)r (leaning. •
Toadjust the milers, remove the base grille by pulling
it out at tile bottom.
Turn tile two fiont roller a(!jusfing screws clockwise
to raise the refiigerator, counterclockwise to lower
it. Use a 3/8" socket x_xench, a(!juslable x_xench or
pliers.
Front R oller
AdjustingScrew
RearRollerAdjustingScrew
(on Built-inStylemodelsonly).
Usethisscrew if the refrigerator
has one.
RearRollerAdjustingScrew
(on BuiltdnStylemodels only).
Usethis screwif the refrigerator
doesnotI_ave thescrew pictured
to the left.
Buih-hl Style models also have rear a(!iustable
rollers so you can align the refiigerator with y{)ur
kitchen cabinels. Use a 5/16" socket _Tench to turn
the screws fi)r the rear rollers-clockwise to raise it,
counterclockwise tolower it.
19