GE Appliances Wine Cooler Owner's Manual page 10

ii+i}ii
Before you call for service...
Troubleshooting -tips
Save time and money! Review the chart below first
and you may not need to call for service.
Possible Causes What To Do
Mo_' tile contFol to a
teIlIl)et_Htlre settiIl_.
Push tit(' t)lug completely
il/tO tile otltIet.
Wine cooler does not Control in OFFposition.
operate
lYhle cooler is
tulplugged.
The tudt was recendy
turned off or mlplugged.
The fuse is bloml/circuit
breaker is tripped.
+ The wine cooler is
equipped with a
thellllOStat COlltroI device.
_l_)tl l//tlSt allow }It
least
three mimltes betore
Iz_starting the unit or
plugging it back in.
R('place filse or reset
tile break('+'.
Vibration or rattling
lYhle cooler is on
Llse .qfim_ to le\ e| the
(slight vibration ml mleven surface. \Ville (oo]er+
is normal)
Motor operates for Normal when wine cooler _Vuil 24 ]_ottrs [or the
long periods or cycles is fin.st plugzged ha. \_rilJe (ooler to (-Oml/letely
COO] do\&r|]+
Often occurs when + This is norn/}d.
large mnomltS of wine
are placed hi wine cooler.
Door left open. Che(k to see ita bottle is
holding door open.
Hot weadler or frequent + This is norn/}d.
door ope_fings.
Temperature control See About the control.
set at tile coldest setting.
Not enough clearance
from the wall.
Make sure there is enottgh
air (irctllatJon aroil]ld tile
_rJ ne ( ooler.
10