GE Appliances Disposall GFC320 Owner's Manual And Installation Instructions page 4

Installation
Instructions
Disposer
I ff you have questions, call 800.GE.CARES (800.432.2737)
or Visit our Website at:
GEAppliances.com I
BEFORE YOU BEGIN
Read these instructions completely and carefully.
• IMPORTANT - S_,,,e these
instructions for local inspector's use.
• IMPORTANT - Obse_,,e _,ll
governing codes and ordinances.
• Note to Installer
-
Be sure
to leave these
instructions with the Gonsumer.
• Note to Consumer - Keep
these instructions
for fi_ture reference.
• Sldll level - Installation of tlfis appliance requires
basic mechanical skills.
• Completion time - 1 hour
• Proper installation is the responsibility of the
insudleL
• Product failure due to improper installation is not
covered under the _rananty.
PREPARATION
1. Disconnect electrical power supply to disposeL
2. Remove old disposer or sink flange assembly.
3. Inspect drain line. If it is heavily coated with hardened
gnease and accumulations, rout out with a plumber's
snake.
4. Remove old sealing mateviMs and gaskefing flom sink
opening, both top and bottom.
NOTE: Top and bottom of sink surfaces must be flee
of any materials to prevent leaks.
WHAT YOU WILL NEED
• Phillips and flat blade screwdrivers
• Channel lock pliers, slip joint
• Hammer
• Nut driver
ADDITIONAL MATERIALSYOU MAY NEED
• Steel punch or wooden dowel
• Petroleum jelly or liquid soap
• Hose clamp
• Dishwasher drain connector
• Adjustable pipe wrench
• Plumber's putty (for cast sinks)
• Stepped rubber drain adapter
• Wire nuts
• Cable connector
• Flexible drain pipe
• Power cord kit (Part Number PM3X215GDS)
4