Panasonic Facsimile UF-590 Operating Instructions Manual page 57

Voice Mode Transmission
On-Hook Dialling
For On-Hook Dialling, follow the steps below.
1
2
You will hear dial tone through the monitor speaker.
3
Dial the telephone number from the keypad.
Ex:
5 5 5 1 2 3 4
4
When you hear a beep,
NOTE
1. If you need a special access number to get an outside line, dial it first then press
enter a pause (represented by a "-") before dialling the full number.
Ex: 9 PAUSE 5551234
2. If you are using Pulse dialling and you wish to change to Tone dialling in the middle of dialling,
press
dialling the digit "/".
Ex : 9 PAUSE * 5551234
Set document(s) face down.
(represented by a"/"). The dialling method will be changed from Pulse to Tone after
Sending Documents
ENTER STATION(S)
THEN PRESS START 00%
* MONITOR *
* DIALLING *
5551234
ON LINE * XMT *
to
PAUSE
57