Setup Menu Commands - LG CodePlus OAT100R Installation & Setup Manual

Configuration Options via Command Line (Cont.)
Exit the Tuner Menu
At the Tuner Command > prompt, type exit and press Enter to exit the Tuner Menu and
return to the OAT100R Main Menu Command > prompt.

Setup Menu Commands

The following subsections describe how to access and use the Setup Menu commands.
Access the Setup Menu
1. Log in to the OAT100R as described on page 39.
2. At the Command > prompt, type setup and press Enter.
3. At the Setup Command > prompt, either:
• Press Enter to display the Setup Menu (see example below).
• Type the desired command and press Enter.
Note: You can always press Enter at the Setup Command > prompt to display the Setup
Menu.
Example: Setup Menu
----------
Setup Menu
----------
info System information
monitor System monitor
map System program map
omode Set output mode
pid System PID configuration
proidiom Pro:Idiom configuration
setip Control port IP configuration menu
rf RF output configuration
scan Scan RF channels
ipout IP output configuration menu
tz Timezone setup
time Time setup
pwd Change password
tundiag Tuner Diagnostic
location Location description
exit Return to the main menu
reset System reset
Setup Command >
48
206-4218