Changing The On-Screen Display Language; Selecting The Signal Source; Programming Channels Into The Tv's Memory; Programming Channels Automatically - Toshiba 32A32 Owner's Manual

Changing the on-screen display language
Choose from three different languages (English, French, or Spanish) for
the on-screen display of menus and messages.
To select an on-screen display language:
1. Press MENU.
2. Press • or _, until the SET UP menu appears.
3. Press • or • to highlight LANGUAGE.
4. Press • or _, to highlight your desired language.
SET UP
fil_[lll/ildlll IVil_[lllllll
TV/CAB L_2 [TV_ CABLE
CR PRO
RA_4
ADD/ERASE: [A_2D] [EEASiE
V-EE_E CONTEOL •
MOVE [_&] SELECT [ 4 P']
CONHGURA _ON
TV/EAELE: [TV] EA_L_
EROGRAM_CAN
A3GUT/E_: [A3OUT_ _F_
CO_TROLE V-EH_P •
VELUE
BOUGER [_] CHOISIR ['q b]
Selecting the signal source
Use the TV/VIDEO button on the remote control or TV to select the signal
source connected to your T_.
To change the signal source:
Repeatedly press TV/VIDEO to select either TV, VIDEO 1,
VIDEO 2, or VIDEO 3 (32A42 and 36A42 only). The selected signal
source is highlighted on-screen.
TV
VIDEO 1
VIDEO 2
TO SELECT PUSH W/VIDEO
32A32
To verify the signal source:
Press RECALL.
TV
VIDEO 1
VIDEO 2
VIDEO 3
TO SELECT PUSH W/VIDEO
32A42 and 36A42
TV Front Panel
TVNIDEO CHANNEL A/Y
MENU TWV_DEO VOLUME CHANNEL POWER
o o 0000:o /
1 -- • --V -- •
MENU •/_ Y/A
POWER
FAV CH TV/VlDEO
r-_-i r-_ _
REC TVNCR STOP PLAY
1_3 IZ3 Fiq 1_3
STILL SOURCE PiP
SLOW PAUSE REW FF
r-_ c-_ r-_--i
VPIP CHA LOCATE SWAP
TOSHIBA
CT-9O037
RECALL
--CHANNEL
NUMBERS
-- MENU
Air .q_
-- CHANNEL
iV
--TVNIDEO
Programming channels into the TV's memory
When you press CHANNEL
AV on the TV or remote control,
the TV stops only on the channels stored in the TV's memory.
Note: To tune the TV to a channel not programmed into the memory,
use the CHANNEL NUMBERS on the remote control.
Follow the steps below and on the next page to program channels into
the TV's memory.
Programming channels automatically
Your TV can automatically detect all active channels in your area
and store them in the TV's memory. After the channels are stored
automatically, you can manually add or erase individual channels
(see page 17).
To program channels automatically:
1. Press MENU.
2. Press • or _, to highlight the SET UP menu.
16