Table of Contents
Advertisement
most lnrrareo-controueo
devices' [SUCh as a losnloa infrared-
controlled VCR or DVD player) enclosed within an entertainment
center or similar cabinet. Without the 1R blaster, the device typically
would need to be visible to operate it remotely.
You can use the TV's remote control (programmed to operate
the device; see pages 17-23) or the device's remote control. Point
the remote control at the front of the TV and press the button for the
desired function. The signal passes from the remote control through
the TV to the device via the IR blaster cable (included with your TV).
To connect, align the IR blaster cable's infrared "eye" with the device's
infrared sensor and attach it using double-sided mounting tape
(included with the cable in the accessory pacD. Plug the other end of
the IR blaster cable into the TV's IR BLASTER OUT terminal.
You will need:
• one 1R blaster cable (included)
• one piece of double-sided mounting tape (included)
IR blaster cable's
Front of infrared-controlled
device*
(such as a Toshiba infrared-controlled
VCR or DVD player)
t
With this connection, point the
ToshibaTVrereote control at
the front of the TVto operate both
the TVand the infraf_d centfolled
device (You also can po/nt the
device's remote contml at the TV
to operate the device, bugyou also
wdlneed to use the TV'sremote
contralto operate file TiK)
For additional control options for your
home if}eater system, you can connect
an/R mceivef/r_peatef
(flat bcluded)
of a home theater control system (flat
included) to the TV's IR BLASTER IN
terminaL*
See the Specifications section In the
back of this manual for IR BLASTER IN
terminal requirements
Cent_et yot/f /}o/?}e t/}eater e/ec'tfo'n/cs
dealer for details about home if}eater
eorltfo/ systems
Back of TV
Back of IR receiver/
repeater or home
theater control system*
(not included)
a_,_a_
With this connecbon,
°°"*"_*Y*'" pointthe Toshiba TV
remotecontrolat the
frontof theIR receiver/
repeater o r home
theatercontrol s ystem
to operatethe TV_
*The IR blaster OUT function has been velified for use with Toshiba infiared controlled devices The I R blastel IN function
has been vedfied for use with _,_¢tR_
SmaiTouchw STS/STS C wireless RFcontrol systems Due to the wide
variation in remote control operation among manu_actuml s , these functions may el may not operate with other brands
SfflBt7i)Lldl
1.% 8 []_d_maf_
of OI_.It]OFI
E/_ctfdn/c&In_
_VVWVV C I_SCIOR COffI_
15
Advertisement
Table of Contents
