Toshiba 14DVL75 Owner's Manual page 32

a disc (continued)
• To obtain a higher quality picture
Occasionally, some picture noise may appear on the TV screen while playing a
DVD video disc because the high resolution pictures on these discs include a lot
of information. In such case, you may reduce the SHARPNESS with the Picture
control adjustment menu (see page 28).
• About _-_>_-_@_
The _@@ icons on the heading bar show the playable discs for the
function described under that heading.
Co_ : You can use this function with DVD video discs.
_ : You can use this function with Video CDs.
<_ :You can use this function with Audio CDs and CD-R/RW CDs.
ii............. iii
POWER
EJECT
TV/DVD
::
VOL +/-
__ PAUSE
....................... PLAY
STOP
iii ii
÷
• To pause playback (still mode)
Press PAUSE during playback.
PAUSE To resume normal playback, press
@ PLAY.
• The sound is muted during still
mode.
• To stop playback
Press STOP.
STOP
Press EJECT.
EJECT
©
• To remove the disc
Remove the disc after the disc comes
out.
÷
Notes:
• If a non-compatible disc is loaded, "incorrect Disc", "Region Code Error" or "Parental Error" will appear on the TV screen
according to the type of loaded disc. In this case, check your disc again (see pages 8 and 45).
• Some discs may take a minute or so to start playback.
• When you set a single-faced disc label downwards (ie. the wrong way up), "Reading" will appear on the display for 30
seconds and then "Incorrect Disc" will continue to be displayed.
• Some discs may not work the resuming facility.
• Resuming cannot function when you play a PBC-featured Video CD while the PBC is on. To turn off the PBC, see page 39.
• Some playback operations of DVDs may be intentionally fixed by software producers. Since this unit plays DVDs according
to the disc contents the software producers designed, some playback features may not be available. Also refer to the
instructions supplied with the DVDs.
• Do not move the unit during playback. Doing so may damage the disc.
• Use the EJECT button to unload and eject the disc. Do not push the disc while it is moving. Doing so may cause the unit to
malfunction.
• Do not put any objects other than discs on the disc slot. Doing so may cause the unit to malfunctions.
• There may be a slight delay between you pressing the button and the function activating.
32
J5N 0621A [El(P31-35) 32
14/01/2005, 7:43 PM