OPERATING AND INSTALLATION INSTRUCTIONS FOR ELECTROLUX REFRIGERATORS INTRODUCTION CONTENTS We are pleased that you have chosen this refrigerator and OPERATING INSTRUCTIONS ..... 8 hope you will derive much satisfaction from using it, but first CONTROLS .
This will ensure that the flame lights ELECTROLUX ventilation grilles A 1620 (fig 2), can be immediately. fitted with winter covers, model WA 120, to protect the To start gas operation: cooling unit against cold air.
On 12 V operation the refrigerator works continuously. When the ice has melted, wipe the refrigerator dry and restart it. Place the food items back inside but wait until the On LP gas operation the refrigerator temperature is regula- ted by the gas thermostat (E), which should be set at 3-5. If refrigerator is cold before making ice cubes.
Service and spare sparts are obtainable from your dealer or Remove the lower trim moulding and then withdraw the Electrolux - consult the telephone directory panel by sliding it downwards. Fit new panel in place and slide it up as far as possible.
Fitting the grilles, model A 1620, which were specially The refrigerator must not be exposed to radiated heat from developed by Electrolux for this purpose (shown as D in fig. hot objects (e.g. below a cooker without proper heat 6). It is a good idea, to install the frame R 1640 (A in the shielding).
The gas installation should only be carried out by an WARNING! THIS APPLIANCE MUST BE EARTHED. authorised gas fitter. In the United Kingdom, the plug or circuit to the refrige-rator The supply pipe should preferably be of copper. If any other must be fitted with a fuse not greater than 5 amps.