Download Print this page

Electrolux Mightymite - Z4203 Owner's Handbook Manual

Cylinder vacuum cleaners

Advertisement

Quick Links

OWNERS HANDBOOK
FOR CYLINDER VACUUM CLEANERS
Model: Mightymite (Z4203)
Welcome to the worldwide club of
vacuum cleaner owners.
Please read these operating instructions before operating your vacuum cleaner.
PRINTED ON RECYCLED PAPER

Advertisement

loading

Summary of Contents for Electrolux Mightymite - Z4203

  • Page 1 OWNERS HANDBOOK FOR CYLINDER VACUUM CLEANERS Model: Mightymite (Z4203) Welcome to the worldwide club of vacuum cleaner owners. Please read these operating instructions before operating your vacuum cleaner. PRINTED ON RECYCLED PAPER...
  • Page 2: Important User Information

    Repairs undertaken by unauthorised or inexperienced persons may cause injury and/or serious malfunctioning of the appliance. • This vacuum cleaner should be serviced by authorised Electrolux personnel and only genuine Electrolux spare parts should be used. Failure to do so may render the warranty void.
  • Page 3 FEATURES 1 Bent end handle 9 Cable rewind pedal 2 Extension tubes 10 On/Off switch pedal 3 Accessory clip on extension tube 11 Rear wheel 4 Combination floor nozzle 12 Crevice nozzle 5 Front cover latch 13 Air outlet grille 6 Accessory clip on base 14 Dusting &...
  • Page 4 can be selected by using the foot- OPERATING operated switch on the left hand side INSTRUCTIONS of the nozzle. See fig.3. WARNING. Always disconnect your vacuum cleaner from the mains supply before maintaining Fig. 3 and or assembling it. (A) When cleaning hard floors, Before you can start using your the bristles should be in the vacuum cleaner you must attach the...
  • Page 5 5 You can disconnect the dusting brush (14) and use it as an upholstery nozzle. See fig.7. Fig. 10 9 Your vacuum cleaner is fitted with an electronic power control knob (15). For normal suction keep the control knob in the Fig.
  • Page 6 12 Store the vacuum cleaner in the upright position. An accessory clip (3 & 6) is situated on the base of the machine and on the lower extension tube (2). These can be used to park the floor tool. Fig. 15 See fig.
  • Page 7 TROUBLE SHOOTING • Once your vacuum cleaner has cooled down, it will start again. If No Power: it does not restart, contact your If your vacuum cleaner does not nearest Electrolux Service Center. operate check the following: • The plug connection.
  • Page 8: Warranty

    PURCHASED FROM: ............................................DATE PURCHASED: .....................MODEL NO:....................SERIAL NO. Electrolux reserves the right to make improvements or modifications to the product from time to time and consequently the details given in this book are subject to PART No: 14547-000 alteration without notice.