Yamaha developed the YHT-500 A/V Home Theater For the video portion, you will need a television or monitor. Refer to the Yamaha HTR-5540 Ownerfs Manual, as well as package to turn your home into a theater. In addition enhancing the sound of a video source, like your TV,...
--gVT_T VIDEO NOTE:For your convenience, the Yamaha HTR-5540 receiver is equipped with two switched AC outlets (!00 W max.). If desired, use them to power on connected components (e.g.,CD player) each time the receiver is turned on. However, do not use them for components equipped with clocks (e.g.,VCR).
Page 4
Strip 1/4"off ends of speaker wires. Stripe Wire Loosen terminals. tighten terminals. Stripe Speaker Wire Wiring Yamaha HTR-5540 AN Receiver (Rear Panel) Set IMPEDANCESelector to right position. YST.SW005 (Subwoofer Stripe Stripe Wire Wire ®® _) _o.o...
Page 5
#iiii AUDIO _gqTPqT • NOTE:When using a hi-fi stereo VCR, set the Tuner/Line switch (on the VCR) to Line position to record from another source connected to the Yamaha HTR-5540 receiver. Satellite Receiver (or Cable Box) WDEO-- ,_F_ .._,11 VideoOut v.Aux...
Page 7
II ...._6 _iN/SpE,_R CENTER _ 8 _I_N ,S_'EAK_a NOTE:When using a hi-fi stereo VCR, set the Tuner/Line switch (on the VCR) to Line position to record from another source connected to the Yamaha HTR-5540 receiver. Hi-Fi Stereo VCR Video Player...
Page 9
OYAMAHA ° YHT-500 QUICK-CONNECT GUIDE INITIAL ADJUSTMENTOF THE YST'SWO05 SUBWOOFER To achieve the optimum volume balance between 4. Play an audio source and adjust the HTR-5540's YST-SW005 Subwoofer and the NS-A329 Main Speakers, VOLUME control to a desired listening level. perform the following procedure:...
Slide the cover back on so that it snaps into place. Receiver Settings MUTE POWERON/Off 1. Aim the remote control at the receiver, press POWER. VOLUME 2. The receiver should turn on. 3. Press the POWER button again to turn the receiver off. ®YAMAHA...