Yamaha RX-V673 Owner's Manual page 71

-Menuoperationk_s
Cursorkeys
ENTER
RETURN
Externaldevice
operation keys
• The playback screen is available only when your TV is connected to the unit via
HDMI.
• You can turn on the unit automatically when starting playback on iTunes or iPod by
setting "Network Standby" (p.98) in the "Setup" menu to "On".
• You can edit the network name (the unit's name on the network) displayed on
iTunes/iPod in "Network Name" (p.99) in the "Setup" menu.
• If you select the other input source on the unit during playback, playback on the
iTunes/iPod stops automatically.
• To adjust the unit's volume from the iTunes/iPod, set "Volume Interlock" (p.83) in
the "Input" menu to "Limited" (default) or "Full".
Cautio_
• When you use iTunes/iPod controls to adjust volume, the volume may be
unexpectedly loud. This could result in damage to the unit or speakers. If the
volume suddenly increases during playback, stop playback on the iTunes/iPod
immediately.
Playback screen
@
@ Playback indicator
@ Playback information
Displays the artist name, album name, song title, and elapsed/remaining
time.
@ Operation menu
Use the cursor keys to select an item and press ENTER to confirm the
selection.
To close the submenu, press RETURN.
Play Control
Screen Off
|11
Resumes playback from pause.
Stops playback temporarily.
Skips forward/backward.
Closes the screen display and shows the
background. Press one of the menu operation
keys to redisplay it.
• You can also use the external device operation keys (_,_, Ill, II, t-,t-ll
l--I,-t) on
the remote control to control playback.
• To control iTunes playback with the remote control of the unit, you need to
configure the iTu nes preferences to enable iTunes control from remote speakers
in advance.
iTunes (example of English version)
Check this box
I J P_everEt _e_s _P_e_, a{_d _Pad_ tr_ 9v_ _J_el_c_
PLAYBACK • Playing backiTunes/iPod musicvia a network(AirPlay) En 71