Insert Batteries In Remote; Place Your Tv/Vcr On A Stable Surface; Connect Antenna Or Cable-Tv System; Turn On The Tv/Vcr - GE 13TVR70 User Manual

m []_" 171 m$11_
Startup
2. Insert batteries in remote.
3. Place your TV/VCR on a stable surface.
CAUTION: To reduce the risk of personal injury or damage to the
TV/VCR, take care in selecting a surface or stand on which to place
your product and when moving or carrying it. Use a stable surface or
a strong steady stand and a location where the TV/VCR cannot be
tipped over or easily pulled off, particularly by children. Do not
attempt to carry or move this product with one hand. If hand grips are
located in the top, grasp the TV/VCR with both hands with the TV
front against your body to prevent it from slipping out of your grasp.
4. Connect antenna or cable.TV system.
Connect the supplied dipole antenna, a different home antenna, or a
cable-TV system. Details on pages 24-26.
5. Connect the Swivel Base to the TV/VCR.
Position the swivel base with the center hole over the screw location
in the center of the bottom of the TV/VCR. Make sure the side with
the ball bearing ring is touching the bottom of the TV/VCR. Insert the
provided screw. Position the TV/VCR bottom down.
Swivel the TV/VCR into the viewing position.
Moving the TV/VCR while it is operating may cause a rainbow effect
from the Earth's magnetic field or nearby appliances.
6. Turn on the TV/VCR.
Press POWER on the TV/VCR or remote. The indicator in the
POWER button on the front of the TV/VCR will light.
3