Table of Contents
Advertisement
Channel Banner
There are several items that might appear on-screen when
you press the INFO button
on the remote, This display is
called the Channel Banner. The following
list describes the
items on the Channel Banner screen (left to right and top to
bottom).
SAP
CC
Stereo or Mono
Skip: 0:30
07:78am
06 ABCDEF
(Ix
Displayed when the current channel
is broadcasting
SAP (Second Audio
Program) information.
Displayed when V-Chip has been
activated.
Displayed when Closed Captioning
is
available on the current channel.
Stereo displayed when the current
channet is broadcasting
in stereo.
Mono displayed when the current
channel is broadcasting
in mono.
Corresponds to the SKiP button.
Shows the amount of time left before
the TV switches back to the previous
channel.
Displays the current time.
Displays the current channel and
labet assigned to the channel,
Displayed when you mute the sound.
Why You Should Use the Auto Tuning Feature
The auto tuning
feature tunes the TV to the correct channel for different
components
you have connected to your TV (like a VCR, DVD Player, etc.) When
you set up auto tuning
in the menu system you don't have to remember to change
your TV to channet 3, for exampie, when you want to watch the tape in your VCR.
NotE,Auto tun#lg Jsno_avaflable wl_hyour remote }4_u mu_ ha vea universal remote,(_old
s_aratu/y) to use _heauto tuning feature
How to Set Up the Auto
Tuning
Feature
The way you set up the auto tuning feature in the TV's menu corresponds to the
component
buttons on the remote and the way you have each component
connected to your TV. When you set up auto tuning, you're telling the TV what
channel to tune to when you press the VCR1, VCR2, DVD, or SAT,CABLE button
on
the remote control.
1, PressMENU (the MAIN MENU appears).
2. Highlight Setup and pressOK on your remote control.
3. Highlight Auto Tuningand pressOK.
Chapter 2
Graphics contained
within
this publication
are for representation
only
9
Advertisement
Table of Contents
