Table of Contents
Advertisement
Getting Started
First-Time Operation
The steps below will help you get your TV connected and working quickly.
Page numbers axe also listed for more details.
1.
Unpack
TV and accessories.
Shown below are the accessories that
came packed with your TV.
Remote Control and
Two Batteries
2. Place batteries
in remote.
1. Turn the remote control face down.
2. Press down on the ridged area of the
battery cover and slide it off.
3. Place two "AAA" batteries as shown
matching the + and - end of each
battery in the compartment
4. Replace the cover.
3. Connect
antenna or cable-TV
system.
Most antenna or cable-TV systems can
• be connected as shown here.
"IV "
Immming Cable from Antenna or
Cable-TV _
Details for connecting a home antenna
to your TV are on page 14.
I_taJls for connecting a cable-TV
system to your TV are on pages 15-16.
4. Attach power cord.
F'trstattach the fiat end of the power cord
completely into the connector on the back
of your TV, and then plug the other end
into a wall outlet.
1st
DoTh_
Not This
t
Advertisement
Table of Contents
