Mitsubishi Electric 3D DLP 642 series Owner's Manual page 24

24 2. TVMenus
& Lock, continued
Lock
>
Lock by Time
Lock Time,
Unmock Time
Prevents aH use of the TV during the time bUock period you specify. You must enter a pass code
to use the TV when the time Uock is in effect. After reUeasing the Uockwith the pass code, the
Uockdoes not go back into effect untiUthe next time the TV is powered on.
EnabUesi'disaMes Lock by Time.
To set the Uockand unUock times:
1. HighUight the Uockor unUocktime.
2. Press ENTER to start editing.
3. Press _ V to make changes.
4. Press ENTER to confirm changes.
Note: To make Lock by Time active 24 hours a day, set Start Time and Stop Time the same.
>
cUeared the next time you perform a channeU scan.
On Uocks and Off unUocks the buttons on the TV's controU panel Use this option if small chiUdren try
to press TV buttons.
o To reUease the PaneULock from the TV's control panel, press and hold the INPUTbutton for ten
seconds. If the TV is powered off, press POWER after the lock releases to power on the TV.
To reactivate the lock, return to this menu and change the setting to On.
Lock
>
Lock
System
Group
Rating
Other Menu Options {amternate rating system)
This TV can recognize new rating systems that may come into effect in the future. Such alter-
nate rating systems will apply only to digital programming received on the ANT input.
The rating system available for the channel
Rating groups available in the rating system shown on the screen. Rating groups are defined by the
rating system in effect.
Rating restrictions available in the selected rating system and group. Highlight the rating and press
ENTER to check (block) or uncheck (allow) rated content.
For assistance call 1(800) 332=2119