LG 22LG3DCH Owner's Manual page 106

Detailed Descriptions of Installer Menu Items
030 - ACK MASK
M.P.I. Communication Parameter. Leave at default set-
ting unless changed by Pay-Per-View provider. When set
to 1, changes M.P.I. for some OCV boxes.
031 - POLL RATE
M.RI. Communication Parameter. Selects Poll Rate for
M.RI. Leave at default setting unless changed by Pay-
Per-View provider. Step size of 16 ms.
032 - TIMING PULSE
M.RI. Communication Parameter. Leave at default set-
ting unless changed by Pay-Per-View provider. Sets
baud rate. Step size of 4.5 uS.
035 - COMPPORT EN. (HDMI 1 Port Enable)
Enable/disables TV display panel HDMI 1 input jack.
Set to 0 to disable, set to 1 to enable.
039 - REAR AUX EN. (Rear Aux Enable)
Set to 1 to enable display panel rear AUX (Video I )
input.
Set to 0 to disable display panel rear AUX (Video I )
input.
046 - STRT AUX SRCE (Start Aux Source)
Sets the starting AUX source. At power up, TV will
tune to starting Aux source if item 004 Start Channel
is set to 0.
255 = Last Aux I = Composite Video/Audio
3 = HDMI
047 - AUX STATUS
Set to I for M.RI. AUX source to be reported as a
channel number instead of channel 0. Set to 0 to dis-
able AUX identification change. Controls M.RI. status
channel response for AUX inputs.
053 - DIS. CH-TIME (Disable Channel-Time)
Set to I to disable the Channel-Time display, Channel-
Time display will not appear. Set to 0 to enable the
Channel-Time display.
069 - EN. CH-T COL. (Enable Text Custom Color)
Set to I to enable custom color for the Channel-]qme display
Set to 0 to disable custom color for the Channel-Time display.
070 - FOR. CH-TIME (Text Display Foreground
Color)
Set according to Color Chart.
0 = Black 3 = Cyan 6 = Yellow
1 = Blue 4 = Red 7 = White
2 = Green 5 = Violet
Notes: Applies only to 'Channel Not Available' mes-
sage if item 073 is set to 1, enabled. If foreground
color and background color are the same, background
will be transparent.
071 - BCK. CH-TIME (Text Display Background
Color)
Set according to Color Chart.
0 = Black 3 = Cyan 6 = Yellow
1 = Blue 4 = Red 7 = White
2 = Green 5 = Violet
Notes: Applies only to 'Channel Not Available' mes-
sage if item 073 is set to 1, enabled. If foreground
color and background color are the same, background
will be transparent.
073 - CH NOT AVBLE (Channel Not Available)
If set to I and item 028 CHANNEL OVERRIDE is set
to 0, "NOT AVAILABLE" message is displayed when
directly accessing a channel not in the channel scan
list available in TV's memory.
075 - REVERT CH (Revert to Start Channel)
If set to 1 and loss of M.RI. communication occurs, TV
automatically tunes to the specified Start Channel.
077 - QUICK SHUTOFF
Allows TV power Off event to be controlled by
Channel Up/Down buttons on the Remote Control, TV
Front Panel and Pillow Speaker. End user would push
and hold channel button down for time required to
have TV turn Off. Setting 0 = disabled. Value Range 0
- IZ each number represents I/2 second. For example,
if set to 4, TV should turn Off after end user pressed
and held any channel button down for a few seconds.
078 - UPN MSB (UPN Most Significant Byte)
User programmable number, most significant byte
readable by M.RI. command. Note: Not linked to serial
number.
079 - UPN MSB-1 (UPN Most Significant Byte-l)
User programmable number, most significant byte-1
readable by M.RI. command. Not linked to serial num-
ber.
080 - UPN MSB-2 (UPN Most Significant Byte-2)
User programmable number, most significant byte-2
readable by M.RI. command. Not linked to serial num-
ber.
081 - UPN LSB (UPN Least Significant Byte)
User programmable number, least significant byte read-
able by M.RI. command. Not linked to serial number.
(Continued on next page)
N
0
I'rl
N
0
I-I-I
I-I-I
-t
c
105