Kenmore 11098762790 Owner's Manual And Installation Instructions page 17

MINIMUM INSTALLATION SPACING
• The installation spacing (shown below)
is in inches and is the minimum allowable.
• Additional spacing should be considered
for ease of installation and servicing.
• If closet door is installed, the minimum
air openings in top and bottom are
required. Louvered doors with equivalent
air openings in top and bottom are
acceptable.
O ooo O
I
273/,"- t I '1"
FRONT V iEW
(DOOR NOT SHOWN)
• Recessed area and closet installations
require a 6-inch minimum clearance
above the laundry center.
• All installations must be exhausted
outside. Use at least the minimum
dimensions indicated.
E}
FRONT VIEW
(DOOR WITH VENT)
J:
3"
T
* Additionalclearances forwall, doorandfloor moldings may be required.
** Openingis minimum for closetdeer.Louvereddoor with equivalent air openings
is acceptable.
***Additional spaceis needed when external exhaustelbow is used.Canbe 0" clearance
when house exhaustingis linedup directly with dryer exhaust.
17