Table of Contents
Advertisement
(4) Installation of cache memory
Install additional cache memory in the controller or additional control card. The
controller and additional control card have the same socket.
Perform the following procedure for installing cache memory in the controller or
additional control card:
• Open the socket levers, and install the cache memory, fitting the two recesses of
the cache memory to the protrusions of the socket.
• Confirm that they are fit correctly. Until the cache memory is secured by the
levers, push the cache memory along the connector rail as far as it will go. Be
careful not to apply excess force to the cache memory in doing so.
• The levers fit into the notches of the cache memory and secure it.
When installing the additional cache memory to the controller or to the
additional control card, push it as far as it will go and then secure it with
the levers.
Incorrect insertion may cause malfunction.
76
Advertisement
Table of Contents
