Making Your Own Design Sheet - Kenmore SCAN 19000 Owner's Manual

MAKING YOUR OWN DESIGN SHEET
If you run out of drawing papers, you may use plain
drawing paper (tracing paper).
Use the template to make additional drawing papers.
Place the template on tracing paper or copier paper.
Use the yellow felt-tip pen to:
(A) Draw lines around and along the outer edges of the
template.
(B) Mark five dots through the holes of the template.
(C) Mark four corners for frame lines'.
C) Tracing paper
(_ Yellow felt-tip pen
(_ Template
For multi-color drawings, mark the positioning dot with the
black felt-tip pen through the hole of template indicated by
an arrow.
(_) Positioning dot
_) Black felt-tip pen
(_) Markings
NOTE:
You do not need a positioning dot for mono-color design.
Draw frame lines and aligning lines. Connect the dots and
corners with the yellow felt-tip pen.
(_ Yellow felt-tip pen
Cut the paper to template size.
Cut the drawing paper along the outlines
36
/
J
(B)
L
l_ I'I
4
q _ J
_j, _,_L -I i I i I I I i I _'i* I •
! _!
J