Assembly; Fitting The Loop Handle; Fitting The Trimmer Guard And Trimmer Head - Husqvarna 122C Operator's Manual

ASSEMBLY
Fitting the loop handle
Clip the loop handle onto the shaft. Note that the loop
handle must be fitted between the arrows on the shaft.
Fit the bolt, securing plate and wing nut as shown in
the diagram.Tighten the wing nut.
Fitting the trimmer guard and
trimmer head
Fit the guard as shown in the diagram. Tighten
securely.
\
Fit the dust cup on the shaft.The nut must be
completely covered by the dust cup.
Hold the dust cup with a spanner to prevent the shaft
from rotating.
Screw the trimmer head onto the shaft.
10 - English