Installing Batteries In Your Remote Control; Choosing The Best Connection For Your Entertainment System - Hitachi DSS SYSTEM Owner's Manual

HITACHI D IGITAL SATELLITE S YSTEM OWNER'S MANUAL
Installing Batteries in Your
Remote Control
Before you can use your remote control, you must install the suppfied AAA batteries. First, slide
the battery cover from the back of the remote control. Install each
fresh battery as shown, making sure that the + and - on each battery
line up with the marks in the battery compartment. Next, slide the
covet" hack onto the remote control. Finally, press the _ key on
the top of the remote control to verify that the key lights up,
indicating that it is operating properly_ If the key doesn't fight, make
sure that the batteries are fresh and that each is inserted in the fight
direction.
Refer to Chapter 9, "Programming Your Hitachi Remote Control"
for setting the codes to control the devices in your entertainment
system.
Remove the battery cover and
insert four AAA batteries as shown
Choosing the Best Connection
for Your Entertainment System
There are a number of ways to connect your Hitachi digital satellite receiver, depending on the
other audio/video equipment you wish to use. We _ show you the simplest hookups.
J
The possible connections
!
Page 8