Creating Groups
All the device information obtained by the Software will be displayed in "All Devices" on the main screen.
Management and settings of devices can be done on a group basis by creating groups for each application and
assigning device information to these groups.
• A device can be assigned to multiple groups.
• "All Devices" on the main screen includes all Sharp devices detected on the network.
To Create a New Group
1
Select "Group Setting (G)" and then "New (N)" from the "Option (O)" menu.
The "Group Setting" dialog box appears.
• All Devices
• Assigned Devices : The devices currently assigned to each group will be displayed.
2
Specify "Group Name" settings.
Any name can be entered (using up to 32 characters). The default setting is "GROUPxxx" (where xxx represents
a sequential number beginning with 001).
3
Select the device you wish to assign to a group (or groups) from "All Devices" and click the
"Add>>" button.
The selected device is transferred to "Assigned Devices".
• To remove a device assigned to the group, select the device to be removed from "Assigned Devices" and click
the "<< Delete" button.
4
When a group has been created, click the "OK" button.
The tab for the new group is added to the main screen and the device information assigned to the group is
displayed.
: Information on "All Devices" on the main screen will be displayed. (Devices not assigned
to this group are displayed if the information is displayed from "Edit (M)" ("To Edit a
Group"
page 16)).
15