Table of Contents
Advertisement
S p e a k e r s S e t u p
To specify the balance and level of the speakers
You can use the Test Tone function to check whether all the
speakers are connected correctly, and to specify the balance
of the speakers.
TEST TONE
1
Press the TEST TONE button on the remote control.
You will hear the test tone from Front-left speaker, Center
speaker, Front-right speaker, Surround-right speaker and
Surround-left speaker in sequence.
2
Sit at your listening position, use the VOLUME
UME
buttons to adjust the level of each speaker..
Adjust the volume level so that the volume of the test tone
from each speaker sounds the same.
The adjusted value will appear on the front panel display
and TV screen. If you do not operate the remote for a few
seconds, the value turns off and is stored in the system.
3
Press TEST TONE again to turn off the test tone.
Note
•
The playback will pause during test tone.
•
The test tone only tests the valid speakers, depending on the
current listening mode.
VOLUME
SELECT
S T A N D B Y
DVD
T U N E R
AUX
SUB
L A N G U A G E
T I T L E
R E T U R N
TITLE
M E N U
G O T O
Z O O M
A N G L E
/PBC
1
2
3
A U D I O
4
5
6
D I S P L A Y
7
8
9
N/P
>10
0
S L E E P
M U T E
MUTE
O P E N /
S E T U P
C L O S E
ENTER
S T O P
P L A Y / P A U S E
S T E P
+
VOLUME
STA-
STA +
S T / M O
A D J / V O L
S L O W
T U
N
TUN +
MEMO
R E P E A T
A - B
P R O G .
S E L E C T
SELECT
TEST
L I S T E N I N G
T O N E
and VOL-
You can vary the level of each speaker as follows. At the same
time, you can adjust the Treble of the front speakers.
1
Press the SELECT button to select a channel. The level of
/
the channel will appear on the front panel display and TV
screen.
TRE (Treble level) adjustable range: -10 dB to +10 dB, 2
dB/step.
FL (Front-left level), CNT (Center level), FR (Front-right
level), SR (Surround-right level), SL (Surround-left level)
and SUB (Subwoofer level) adjustable range: -15 dB to
+10 dB, 1 dB/step.
2
Use the VOLUME
selected channel's level.
3
If you do not press the SELECT or VOLUME
for a few seconds, the values turns off and is stored in the
system.
Note
•
The optional items vary with the changing of listening mode.
To adjust the volume of all the speakers (Master Volume) at
one time
Use the VOLUME
To shut off all of speakers' output
Press the MUTE button. The red LED on the front panel starts
to blink.
Press it a second time to release muting and resume the
normal output. The blinking LED blacks out.
and VOLUME
buttons to adjust the
and VOLUME
buttons in normal mode.
/
buttons
25
Advertisement
Table of Contents
