Table Of Contents - Craftsman 486.24385 Owner's Manual

CARTON CONTENTS (Loose Parts in Carton)
1. Poly Tray
2. Handle Tube
3. Tool Holder Bracket
4. Latch Stand Plate
5. Latch Stand Bracket
6. Wheel Support
7. Front Tongue
8. Rear Tongue
9. Wheels (2)
10. Axle
11. Hitch Bracket
12. Leg Stand Bracket
13. Latch Lock
14. Latch Mount Brackets (2)
CARTON CONTENTS
TOOLS REQUIRED FOR ASSEMBLY
(1) Screwdriver
(1) Pliers
(2) 7/16" Wrenches
(2) 1/2" Wrenches
(2) 9/16" Wrenches
• Remove the hardware pack and all loose parts from
the carton. Be sure the carton is empty before
discarding.
• Lay out all the parts shown on pages 3 and 4.
NOTE: All 1/4" fiat washers should be assembled so
that they rest directly against the poly tray surface.
Assemble the latch lock between the latch mount
brackets using a 1/4' x 3/4" hex bolt and a 1/4" hex
lock nut. Tighten so that the latch lock can still pivot.
Attach the extension spring to the latch lock and the
latch mount bracket as shown in figure 1.
• Insert the 3/8" x 1" clevis pin through the holes in the
latch mount brackets and secure with a 1/8' hairpin
cotter. See figure 1.
LATCH MOUNT
BRACKETS
1/4" x 3/4"
HEX BOLT
1/4" HEX
LOCK NUT
EXTENSION
SPRING
/
3/8" X 1"
CLEVIS PIN
1/8" HAIRPIN
COTTER
LATCH LOCK
FIGURE 1
LL