Craftsman 320.28160 Product Manual page 4

Some of these following symbols may be used on this tool. Please study them and
learn their meaning. Proper interpretation of these symbols will allow you to operate
the tool better and more safely.
SYMBOL NAME DESIGNATION / EXPLANATION
v Volts Voltage
A Amperes Current
az Hertz Frequency (cycles per second)
w Watt Power
min Minutes Time
"%, Alternating Current Type of current
..--= Direct Current Type or a characteristic of current
no No Load Speed Rotational speed, at no load
[] Class II Construction Double-insulated construction
.../min Per Minute Revolutions, strokes, surface speed,
orbits, etc., per minute
{_ Wet Conditions Alert Do not expose to rain or use in damp locations.
To reduce the risk of injury, user must
Read the Product Manual read and understand product manual
before using this product.
Always wear safety goggles or safety
Eye Protection glasses with side shields and a full-face
shield when operating this product.
_, Safety Alert Precautions that involve your safety.
Failure to keep your hands away from
No Hands Symbol the blade will result in serious personal
injury.
Failure to keep your hands away from
No Hands Symbol the blade will result in serious personal
injury.
Failure to keep your hands away from
No Hands Symbol the blade will result in serious personal
injury.
,_ Failure to keep your hands away from
No Hands Symbol the blade will result in serious personal
injury.
_) To reduce the risk of injury or damage, Hot Surface avoid contact with any hot surface.
28160 Manual Revised 07-0228 Page 4