Sharp AR-C262M Key Operator's Manual
  1. Manuals
  2. Brands
  3. Sharp Manuals
  4. Copier
  5. AR-C262M Key
  6. Key operator's manual
Sharp AR-C262M Key Operator's Manual

Sharp AR-C262M Key Operator's Manual

Digital full colour multifunctional system
Hide thumbs Also See for AR-C262M:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Operating Manual
KEY OPERATOR'S GUIDE
AR-C262M
DIGITAL FULL COLOUR MULTIFUNCTIONAL
SYSTEM
This manual describes programs for use by the key operator. The
key operator should read this manual thoroughly to gain the
maximum value that these programs provide.
• PURPOSE OF THE KEY

OPERATOR PROGRAMS

• KEY OPERATOR

PROGRAM LIST

• USING THE KEY
OPERATOR PROGRAMS

• GENERAL PROGRAMS

• PROGRAMS FOR COPY
MODE
Be sure to become thoroughly familiar with this manual to gain
the maximum benefit from the product.
Before installing this product, be sure to read the installation
requirements and cautions sections of the "Operation manual
(for general information and copier operation)".
Be sure to keep all operation manuals handy for reference
including this manual, the "Operation manual (for general
information and copier operation)" and operation manuals for any
optional equipment which has been installed.
MODEL
Page
1
2
3
6
14

Advertisement

Table of Contents
loading

Related Manuals for Sharp AR-C262M

Summary of Contents for Sharp AR-C262M

  • Page 1: Operator Programs

    KEY OPERATOR'S GUIDE MODEL AR-C262M DIGITAL FULL COLOUR MULTIFUNCTIONAL SYSTEM This manual describes programs for use by the key operator. The key operator should read this manual thoroughly to gain the maximum value that these programs provide. Page • PURPOSE OF THE KEY OPERATOR PROGRAMS •...

  • Page 3: G Purpose Of The Key Operator Programs

    Contents page G PURPOSE OF THE KEY OPERATOR PROGRAMS .................1 G KEY OPERATOR PROGRAM LIST....................2 G USING THE KEY OPERATOR PROGRAMS..................3 G GENERAL PROGRAMS ........................6 G PROGRAMS FOR COPY MODE ......................14 The display screens, messages, and key names shown in the manual may differ from those on the actual machine due to product improvements and modifications.

  • Page 4: Table Of Contents

    KEY OPERATOR PROGRAM LIST The following list shows programs that are common to all functions of the machine (copy, fax, printer, and network scanner functions) and programs that are specifically for the copy function. Key operator programs can only be accessed after a key operator code number has been entered. NOTE The key operator programs that can be accessed depend on the optional equipment that is installed.

  • Page 5: Using The Key Operator Programs

    USING THE KEY OPERATOR PROGRAMS The procedure for configuring the key operator programs is explained below using the "Key operator code change" program as an example. Follow the same steps to configure the programs that are explained beginning on page 6. Press the [CUSTOM SETTINGS] key.
  • Page 6 USING THE KEY OPERATOR PROGRAMS Supplementary explanation of key operation for key operator programs These keys and indicator are available on setting screens that require the entry of numerical values. KEY OPERATOR PROGRAMS (1-999) DEVICE CONTROL SEC. DISABLING OF DOCUMENT ORIGINAL SIZE DETECTOR SETTING FEEDER DISABLING OF DUPLEX...
  • Page 7 USING THE KEY OPERATOR PROGRAMS Key operator program menu The key operator programs are arranged in the following menu. Refer to this menu when enabling or disabling the settings that are explained beginning on the following page. * Some programs contain an additional level of settings (setting screen). Level 1 Level 2 Level 3...

  • Page 8: Account Control

    GENERAL PROGRAMS This section explains key operator programs that are related to all functions of the machine (copy, fax, printer, and network scanner functions). Account control "Account control" consists of the following programs. • If you wish to disable auditing mode for all functions, G Auditing mode touch the [DISABLE] key.

  • Page 9: Total Pages Per Account

    GENERAL PROGRAMS Total pages per account Resetting account This program is used to display or print the total This program is used to reset either all or individual number of prints of each account. Misfed paper is not audit accounts. counted.

  • Page 10: Account Limit Setting

    GENERAL PROGRAMS Account limit setting Account number security This program is used to set the maximum number of This program is used to prevent users from gaining copies which can be made against a registered access to accounts by entering code numbers through account number.

  • Page 11: Energy Save

    GENERAL PROGRAMS Energy save "Energy save" provides the following the programs to NOTE help reduce your power costs. From an environmental Rather than disabling the auto power shut-off perspective, these programs also help conserve mode, we suggest that you first try lengthening the natural resources and reduce pollution.

  • Page 12: Operation Settings

    GENERAL PROGRAMS Operation settings The "Operation settings" are related to basic operation Display language setting of the machine and consist of the following programs: This program is used to select the display language. G Keys touch sound G Auto clear setting Message time setting G Display language setting This program is used to set the length of time that...

  • Page 13: Device Control

    GENERAL PROGRAMS Device control Use these programs when a peripheral device on the Disabling of duplex machine has failed or when you wish to temporarily This program is used to disable duplex printing when disable a device. The programs can also be used to the duplex module malfunctions.

  • Page 14: Saddle Stitch Position Adjust

    GENERAL PROGRAMS Saddle stitch position adjust Stream feeding mode This program is used to adjust the stapling position This program is used to enable the stream feeding (folding position) when using the saddle stitch function mode of the document feeder. When the stream of the optional saddle stitch finisher.
  • Page 15 GENERAL PROGRAMS G Manually adjusting the registration The procedure for manually adjusting the registration is explained here. This procedure is used when you select manual adjustment in the [Registration adjustment] key operator program explained on page 12. Touch the [MANUAL ADJUSTMENT] key and then the [EXECUTE] key to print the adjustment pattern for manual registration adjustment.

  • Page 16: Return From Copy Mode Timing

    PROGRAMS FOR COPY MODE Return from copy mode timing Product key After printing ends in copy mode, this program is used Use these programs to input data required to activate to set the amount of time until the mode is changed and the following systems.

  • Page 17: Exposure Adjustment

    PROGRAMS FOR COPY MODE Exposure adjustment Initial colour balance setting Use this program to lighten or darken copies in the Colour balance settings that have been adjusted using automatic exposure mode. The factory setting is "5". the special "Colour Balance" function explained on "1"...

  • Page 18: B/W 600Dpi Scanning Mode For Document Feeder

    PROGRAMS FOR COPY MODE After the [EXECUTE] key is touched and a test patch ENABLE/DISABLE SETTINGS printed, a message appears asking you to begin "Enable/Disable settings" consists of the following automatic adjustment. Place the test patch on the programs: document glass as shown below and touch the G Disabling deletion of job programs [EXECUTE] key.
  • Page 20 AR-C262M KEY OPERATOR'S GUIDE This manual has been printed using a vegetable-based soy oil ink to help protect the environment. PRINTED IN CHINA 2004L Printed on 100% post-consumer recycled paper TINSE2955FCZZ...

Table of Contents