Epson PowerLite 8000i User Manual page 108

98
3 • Using the Projector Menus
Menu item Description
Video Signal Specifies the input image signal mode. You can select AUTO, NTSC,
NTSC 4.43, NTSC50, PAL, N PAL, M PAL, PAL 60 or SECAM.
Rear Projection Mirrors the projected image on its Y-axis (left-right). Selecting ON
turns mirroring on, while OFF turns it off (for a normal image). Turn
on this option when projecting from behind onto a transparent
screen.
Ceiling Mirrors the projected image on its X-axis (top-bottom). Selecting ON
turns mirroring on, while OFF turns it off (for a normal image). Turn
this option on when the projector is mounted upside-down from the
ceiling.
Mouse/Com Locks and unlocks the Mouse/Com port.
Select 1 to assign the wireless mouse control to the computer
connected to the Mouse/Com 1 port only.
Select 2 to assign the wireless mouse control to the computer
connected to the Mouse/Com 2 port only.
Selecting 1
mouse control whenever the input source computer is changed.
Reset Returns all Advanced menu items to their initial factory defaults.
Select this item and then press the Enter button to display the
confirmation screen. Next, select Yes and then press the Enter
button to reset the Advanced menu.
If you change your mind, select No and then press the Enter button
to clear the confirmation screen without changing any settings.
2 tells the projector to automatically switch wireless