Sharp AN-WC11B Operation Manual page 12

Using Windows 2000
10
Insert the Wireless LAN PC Card into the PC card slot.
CAUTION
• Do not insert the Wireless LAN PC Card until the computer is fully loaded.
• Make sure to insert the wireless LAN PC Card with the LINK indicator facing upwards. If you
force the card into the slot in the wrong direction, it may damage the connector and communi-
cation will not be possible.
The location of the PC card slot may vary depending on your computer. For details, refer to the
documentation that comes with your computer.
11
Follow the instructions displayed on the screen below.
• When the "Digital Signature Not Found" dialog box is displayed, click "Yes".
I Check if the "Configuration Utility for Wireless LAN" is displayed on the task
tray
Configuration Utility for Wireless LAN icon
(The color of the icon varies according to the signal status.)
If this icon is not displayed on the status bar, the driver is not properly installed.
See "If the unit does not function
12
From the "Start" menu, click "Settings", and then "Control Panel".
13
Double click the "System" icon.
14
Click the "Hardware" tab, and then "Device Manager".
15
Double click "Network adapters".
If the "Sharp AN-WC11B Wireless LAN PC Card" is displayed, installation is completed.
If there is a yellow " ? " or " ! " mark next to the "Sharp AN-WC11B Wireless LAN PC Card"
icon, then installation has failed. Refer to
-12
properly" on page 14 to uninstall and then reinstall the driver.
"11. Troubleshooting" on page 28.