Using the Remote Control
46
Changing the Image's Aspect Ratio
If you're projecting a widescreen format image, you can use the
button on the remote control to change the aspect (width to
Aspect
height) ratio from
.
4:3
You can change video images to
or
(to accommodate subtitles or supertitles).
(Up)
16:9 (Down)
You can change computer images to
.
Normal
Press the
button again to cycle through the available options.
Aspect
You can also change the aspect ratio using the projector's Signal
menu. See page 56 for details.
Highlighting Your Presentation
You can display a pointer to call out something on the screen or
emphasize particular points. There are three pointer shapes you can
choose from.
Using the Pointer Tool
1. To activate the pointer tool, press the
remote control. A pointer appears on the screen.
If you prefer to use a different pointer, see page 47 for instructions
on changing the pointer shape.
2. Use the
pointer button on the remote control to position the
pointer on the screen.
3. When you're done using the pointer, press the
button on the remote control.
(widescreen format), or
16:9
(widescreen format) or
16:9
button on the
Pointer
Pointer
Pointer
16:9
or
Esc