Installing Batteries In The Remote Control - Epson ELPDC02 User Manual

Installing Batteries in the
Remote Control
Before using the remote control, you need to install its batteries as
described below.
1. Press down on the ridged
area and remove the battery
compartment cover.
2. Insert two AAA batteries as
shown.
3. Replace the battery
compartment cover.
caution
When replacing batteries,
take the following
precautions:
Don't mix old and new
I
batteries.
ridged
area
Replace batteries as soon as
I
they run out. If the
batteries leak, wipe away
battery fluid with a soft
cloth. If fluid gets on your
hands, wash them
immediately.
Don't expose batteries to
I
heat or flame.
Dispose of used batteries
I
according to local
regulations.
Remove batteries if you
I
won't be using the
document camera for a
long period of time.
Setting Up the Document Camera
7